Best Price for Single Plate Wafer Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng
Short Description:
Best Price for Single Plate Wafer Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng Detail:
Product Video
Product Description
Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment.
Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertical or horizontal piping.
Key features:
- Available in sizes: 2″ to 12“.
- Temperature range: -20°C to 200°C.
- Pressure rating: 10 Bar/16 Bar/25 Bar.
- Low cracking pressure.
- Space saving design.
Product parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40/SS304/SS316 |
| 2 | Ring | Steel |
| 3 | Axle | SS304/SS316 |
| 4 | Spring | Stainless steel |
| 5 | Gasket | PTFE |
| 6 | Disc | WCB/SS304/SS316 |
| 7 | Seat ring | NBR/EPDM/VITON |
| 8 | Gasket | NBR |
| 9 | Screw | Steel |
| NO. | Part | Material |
| DN(mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 44.5 | 47.6 | 50.8 | 57.2 | 63.5 | 69.9 | 73 | 79.4 | 85.7 | 108 | 108 | |
| ΦE(mm) | 33 | 43 | 52 | 76 | 95 | 118 | 163 | 194 | 241 | 266 | 318 | |
| Φ(mm) | PN10 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 328 | 378 | 438 | 489 |
| PN16 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 329 | 384 | 446 | 498 | |
Product show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Best Price for Single Plate Wafer Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng , The product will supply to all over the world, such as: Peru, Cairo, Hongkong, We are sticking to excellent quality, competitive price and punctual delivery and better service, and sincerely hope to establish long-term good relationships and cooperation with our new and old business partners from all over the world. Sincerely welcome you to join us.
By Madge from El Salvador - 2017.12.19 11:10
Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
By Wendy from Victoria - 2017.07.28 15:46
Related products
-
New Fashion Design for Stainless Steel Check Va...
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...
-
PriceList for Dual Plate Non Return Valve - DI...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Wholesale Ci Gate Valve - DIN3352-F4 Resilient...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Factory Cheap Cast Steel Ball Valve - 1pc Flan...
Product Description Application: The stainless ball valves from 1 piece is designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases and loose materials. Medium may flow in both directions through the ball valves. Thanks to their simple design and reliable function, the ball valves made of one piece can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. Technical description: T max = 200 C PN: 10, 16...
-
High reputation Diaphragm Type Valve - Rising ...
Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. We’ll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of international top-grade and high-tech enterprises for New Style China DN300...
-
China Gold Supplier for Full Lug Butterfly Valv...
Product Video Product Description Dimensions: Size : DN 32 to DN 600; Ends : Mounting between ANSI 150 and DIN PN 10/16 pipe flanges; Specifications: Type of valve: Butterfly valve wafer type; Ductile iron butterfly valve min Temperature : -5°C; Ductile iron butterfly valve max Temperature :+ 180°C; Max Pressure : 16 bars up to DN300, 10 bars over ; Removable seat; Actuator mounting plate according to ISO 5211; Full crossing stem; Lockable Handle 9 positions up to DN200. Non-lockable handl...
