Banner-1

Factory Cheap Hot Check Valve - Threaded Ball Check Valve – Dongsheng

Short Description:

  • sns02
  • sns03
  • whatsapp

dsv product2 egr

Product Detail

Product Tags

Related Video

Feedback (2)

We always stick to the principle "Quality First, Prestige Supreme". We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for Waste Water Check Valve, C515 Gate Valve, 2 Inch Silent Check Valve, If needed, welcome to make contact with us by our web page or phone consultation, we will be delighted to serve you.
Factory Cheap Hot Check Valve - Threaded Ball Check Valve – Dongsheng Detail:

Product Video

Product Description

The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0~80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve.

Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated aluminum ball.
Either vertically (only upwards) or horizontally installed.

Key features:

  • Available in sizes: 1″ up to 3″.
  • Temperature range: 0°C to 80°C or -10°C to 120°C.
  • Pressure rating: PN10 rated
  • Easy to maintain and install.
  • Low cracking pressure.

For full details please download the accompanying datasheet.

  • Ball Check Valve with Ductile Iron body
  • NBR/EPDM seat
  • Threaded BSP

Product parameter

Product parameter2 Product parameter1

NO. Part Material
1 Body GG25/GGG40
2 Gasket NBR/EPDM
3 Cap GG25/GGG40
4 Ball NBR/EPDM
5 Bolt Stainless steel
6 Nut Stainless steel
DN(mm) 25 32 40 50 65 80
L(mm) 125 132 145 174 200 243
H(mm) 75 75 85 126 113 165

Product Show

minimage16 minimage15
Contact: Judy  Email: info@lzds.cn   phone/WhatsApp +86 18561878609.


Product detail pictures:

Factory Cheap Hot Check Valve - Threaded Ball Check Valve – Dongsheng detail pictures

Factory Cheap Hot Check Valve - Threaded Ball Check Valve – Dongsheng detail pictures

Factory Cheap Hot Check Valve - Threaded Ball Check Valve – Dongsheng detail pictures


Related Product Guide:

We thinks what buyers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better high-quality, reduced processing costs, charges are more reasonable, won the new and outdated consumers the support and affirmation for Factory Cheap Hot Check Valve - Threaded Ball Check Valve – Dongsheng , The product will supply to all over the world, such as: USA, Uzbekistan, British, By adhering to the principle of "human oriented, winning by quality", our company sincerely welcomes merchants from at home and abroad to visit us, talk business with us and jointly create a brilliant future.
  • The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
    5 Stars By Odelia from Greek - 2017.02.28 14:19
    The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
    5 Stars By Eve from New Orleans - 2018.12.14 15:26
    Write your message here and send it to us

    Related products

    • Factory best selling Flange Ball Valve - 1pc Threaded Ball Valve – Dongsheng

      Factory best selling Flange Ball Valve - 1pc T...

      Product Video Product Description Stainless Steel Ball Valve is a non-maintainable one piece, reduced bore ball valve; providing reliable functioning for both general and industrial chemical applications. An economical, compact and reliable, female/female ball valve with CF8/CF8M Stainless Steel valve body and PTFE seat. Used to ‘shut-off’ medium flows on a wide range of liquid and gaseous duties including drain and blow down, gauge isolation and test points. Features a blow-out p...

    • Chinese wholesale Cast Iron Dual Plate Check Valve - Flanged Ball Check Valve – Dongsheng

      Chinese wholesale Cast Iron Dual Plate Check Va...

      Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...

    • China Gold Supplier for Full Lug Butterfly Valve - Flanged Butterfly Valve – Dongsheng

      China Gold Supplier for Full Lug Butterfly Valv...

      Product Video Product Description The butterfly valve is a valve that uses a disc-type opening and closing member to reciprocate about 90° to open, close or adjust the flow of the medium. The butterfly valve is not only simple in structure, small in size, light in weight, low in material consumption, small in installation size, small in driving torque, simple and fast in operation, but also has good flow regulation and closing and sealing characteristics at the same time. It has been develope...

    • China OEM Flanged Check Valve - Cast Iron Double Disc Swing Check Valve – Dongsheng

      China OEM Flanged Check Valve - Cast Iron Doub...

      Product Video Product Description The function of the dual plates check valve is to only allow the medium to flow in one direction and prevent the flow in one direction. Usually this kind of valve works automatically. Under the action of the fluid pressure flowing in one direction, the valve flap opens; when the fluid flows in the opposite direction, the fluid pressure and the self-coincidence of the valve flap act on the valve seat, thereby cutting off the flow. Structural Features of Wafer ...

    • PriceList for C515 Gate Valve - DIN3352-F4 New Style Resilient Gate Valve – Dongsheng

      PriceList for C515 Gate Valve - DIN3352-F4 New...

      Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...

    • 8 Year Exporter Dual Plate Valve – DIN3352-F4 Resilient Gate Valve – Dongsheng

      8 Year Exporter Dual Plate Valve – DIN335...

      Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...