Banner-1

Factory Outlets Wafer Check Valves - Flanged Ball Check Valve – Dongsheng

Short Description:

  • sns02
  • sns03
  • whatsapp

dsv product2 egr

Product Detail

Product Tags

Related Video

Feedback (2)

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs for 150mm Gate Valve, Foot Valve With Strainer, Ball Check Valve, We're prepared to present you with the most effective ideas over the designs of the orders in a qualified way for those who need. While in the meantime, we continue to keep on producing new technologies and building new designs so as to help make you ahead from the line of this small business.
Factory Outlets Wafer Check Valves - Flanged Ball Check Valve – Dongsheng Detail:

Product Video

Product Description

Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc.
The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is closed and there is no water hammer.

Our Flanged Ball Check Valve body adopts a full water flow channel, with large flow and low resistance, provides outstanding sealing capacities for low pressure. It can be used in cold water, industrial and domestic sewage pipe networks, and is more suitable for submersible sewage pumps. It can be installed at the outlet of the water pump to prevent back flow and water hammer from damaging the pump.

Cast/Ductile iron body and cap, epoxy-coated body, NBR/EPDM seat and NBR/EPDM-coated aluminum ball ( 8″ to 16″ NBR/EPDM covered cast iron ball).
Either vertically (only upwards) or horizontally installed.

Key features:

  • Available in sizes: 1 1/2″ up to 16″.
  • Temperature range: 0°C to 80°C or  -10°C to 120°C.
  • Pressure rating: PN16/10 rated (1 1/2″ to 8″) and PN10 (10″ to 16″).
  • Easily maintainable.
  • Low cracking pressure.

For full details please download the accompanying datasheet.

  • Ball Check Valve
  • Cast/Ductile Iron body
  • NBR/EPDM seat
  • Flanged PN16, PN10
  • Sizes 1 1/2″ to 16″

Product parameter

Product parameter2Product parameter1

NO. PART MATERIAL
1 Body GG25/GGG40
2 Ball Metal+ NBR/EPDM
3 Cap GG25/GGG40
4 Bolt Stainless Steel
5 Gasket NBR/EPDM
DN(mm) 40 50 65 80 100 125 150 200 250 300 350 400
L(mm) 180 200 240 260 300 350 400 500 600 700 800 900
H(mm) 98 106 129 146 194 207 240 322 388 458 610 705
ΦD(mm) PN10 Φ110 Φ125 Φ145 Φ160 Φ180 Φ210 Φ240 Φ295 Φ350 Φ400 Φ460 Φ515
PN16 Φ110 Φ125 Φ145 Φ160 Φ180 Φ210 Φ240 Φ295 Φ355 Φ410 Φ470 Φ525

Product show

FLANGED BALL CHECK VALVE
Contact: Judy  Email: info@lzds.cn  Whatsapp/phone: 0086-13864273734


Product detail pictures:

Factory Outlets Wafer Check Valves - Flanged Ball Check Valve – Dongsheng detail pictures

Factory Outlets Wafer Check Valves - Flanged Ball Check Valve – Dongsheng detail pictures

Factory Outlets Wafer Check Valves - Flanged Ball Check Valve – Dongsheng detail pictures


Related Product Guide:

To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for Factory Outlets Wafer Check Valves - Flanged Ball Check Valve – Dongsheng , The product will supply to all over the world, such as: New Zealand, South Africa, Senegal, Ensuring high product quality by choosing the best suppliers, we have also implemented comprehensive quality control processes throughout our sourcing procedures. Meanwhile, our access to a large range of factories, coupled with our excellent management, also ensures that we can quickly fill your requirements at the best prices, regardless the order size.
  • Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
    5 Stars By Amy from Provence - 2018.07.12 12:19
    The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By Rita from Cyprus - 2018.09.12 17:18
    Write your message here and send it to us

    Related products

    • Hot Selling for Wafer Silent Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng

      Hot Selling for Wafer Silent Check Valve - Sta...

      Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...

    • China Manufacturer for Foot Valve With Strainer - DIN3352-F4 Resilient Gate Valve – Dongsheng

      China Manufacturer for Foot Valve With Strainer...

      Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...

    • Trending Products Waste Water Check Valve - Cast Iron Double Disc Swing Check Valve – Dongsheng

      Trending Products Waste Water Check Valve - Ca...

      Product Video Product Description The function of the dual plates check valve is to only allow the medium to flow in one direction and prevent the flow in one direction. Usually this kind of valve works automatically. Under the action of the fluid pressure flowing in one direction, the valve flap opens; when the fluid flows in the opposite direction, the fluid pressure and the self-coincidence of the valve flap act on the valve seat, thereby cutting off the flow. Structural Features of Wafer ...

    • Fixed Competitive Price Ci Foot Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng

      Fixed Competitive Price Ci Foot Valve - DIN335...

      Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...

    • OEM Supply Dual Wafer Check Valve - Small Size Wafer Type Lift Check Valve – Dongsheng

      OEM Supply Dual Wafer Check Valve - Small Size...

      Product Video Product Description Disco or lift check valves, the main advantage is that it mainly eliminates the impact of gravity on the feature of the check valve. Lift check valves for a broad range of mediums, pressures and equipment. The metal springs for the check valves are produced of stainless steel or some other extremely corrosion resistant steel material. Lift check valve’s advantages are quick stream disruption. They provide not only beneficial sealing at low temperatures but al...

    • Lowest Price for Spring Loaded Check Valve - Big Size Wafer Type Lift Check Valve – Dongsheng

      Lowest Price for Spring Loaded Check Valve - B...

      Product Video Product Description Check valves allow flow in one direction and automatically prevent flow in the opposite direction. This valve is mainly used in the fluid system containing strong oxidative mediums, like water supply system, heat supply system and acid system etc. It is always used as accessory of boilers. It has exquisite profile and simple structure. Its spring device functions to speed up the closing movement of the disc so as to eliminate water hammer. This valve is very ...