Banner-1

Fast delivery Wedge Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng

Short Description:

  • sns02
  • sns03
  • whatsapp

dsv product2 egr

Product Detail

Product Tags

Related Video

Feedback (2)

To continually enhance the management technique by virtue of your rule of "sincerely, great faith and high-quality are the base of company development", we widely absorb the essence of similar merchandise internationally, and continuously build new merchandise to meet the demands of customers for Cast Steel Ball Valve, Di Gate Valve, Single Disc Check Valve, Together with the everlasting target of "continuous top quality improvement, customer satisfaction", we have been sure that our products high quality is stable and trustworthy and our solutions are best-selling at your home and overseas.
Fast delivery Wedge Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng Detail:

Product Video

Product Description

The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the valve diameter, the fluid passage is completely unblocked, but this position cannot be monitored during operation.

In actual use, the apex of the valve stem is used as the mark, that is, the unmovable position, as its fully open position. In order to take into account the lock-up phenomenon caused by temperature changes, it is usually opened to the top position, and then rewind 1/2-1 turn, as the position of the fully open valve. Therefore, the fully open position of the valve is determined by the position of the gate (i.e. stroke). This type of valve should generally be installed horizontally in the pipeline.

Product parameter

Product parameter2Product parameter1

NO. Part Material
1 Body GGG40/GGG50
2 Bonnet GGG40/GGG50
3 Stem 2Cr13/SS304/SS316/Brass
4 Disc GGG40/GGG50 with NBR/EPDM
5 Stem Nut Brass
DN 40 50 65 80 100 125 150 200 250 300 350 400 450 500
L 140 150 170 180 190 200 210 230 250 270 290 310 330 350
D PN10 150 165 185 200 220 250 285 340 395 445 505 565 615 670
PN16 405 460 520 580 640 715
D1 PN10 110 125 145 160 180 210 240 295 350 400 460 515 565 620
PN16 355 410 470 525 585 650
D2 PN10 88 102 122 138 158 188 212 268 320 370 430 482 530 586
PN16 378 438 490 548 610
b 17 17 17 17 19 19 19 22 23 26 28 30 30 32
n-d PN10 4-18 4-18 4-18 8-18 8-18 8-18 8-22 8-22 12-22 12-22 16-22 16-26 20-26 20-26
PN16 12-22 12-28 12-28 16-26 16-30 20-30 20-34
H PN10 200 215 245 285 320 360 415 445 585 670 980 1144 1250 1366
PN16 480
C 160 160 180 200 200 250 250 280 320 350 350 500 500 500

Product Show

DIN3352-F4 RESILIENT GATE VALVE
Contact: Judy  Email: info@lzds.cn  Whatsapp/phone: 0086-13864273734


Product detail pictures:

Fast delivery Wedge Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng detail pictures

Fast delivery Wedge Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng detail pictures

Fast delivery Wedge Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng detail pictures


Related Product Guide:

We're committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Fast delivery Wedge Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng , The product will supply to all over the world, such as: Mombasa, Jordan, Salt Lake City, All the imported machines effectively control and guarantee the machining precision for the items. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality items and have the ability to develop new merchandise to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.
  • This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
    5 Stars By Marina from San Francisco - 2018.12.30 10:21
    The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
    5 Stars By Elma from Libya - 2017.12.09 14:01
    Write your message here and send it to us

    Related products

    • OEM manufacturer Ball Lift Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng

      OEM manufacturer Ball Lift Check Valve - Stain...

      Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...

    • Special Price for Wafer Disc Check Valve - BS5153 Swing Check Valve – Dongsheng

      Special Price for Wafer Disc Check Valve - BS5...

      Product Video Product parameter NO. Part Material 1 Body GG20/GG25/GGG40/GGG50 2 Bonnet GG20/GG25/GGG40/GGG50 3 Disc GG20/GG25/GGG40/GGG50 with Brass/Bronze/Stainless steel 4 Seat Brass/Bronze/Stainless steel 5 Pin 2CR13  SS304 DN 50 65 80 100 125 150 200 250 300 L 203 216 241 292 330 356 495 622 698 D PN10 165 185 200 220 250 285 340 395 445 PN16 405 460 D1 PN10 125 145 160 180 210 240 295 350 400 PN16 355 410 D2 PN10 102 122 138 158 188 212 268 320 370 PN1...

    • Fixed Competitive Price Ci Foot Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng

      Fixed Competitive Price Ci Foot Valve - DIN335...

      Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...

    • Excellent quality Double Door Check Valve - Wafer Silent Check Valve – Dongsheng

      Excellent quality Double Door Check Valve - Wa...

      Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...

    • Massive Selection for Double Flange Butterfly Valve - Flanged Butterfly Valve – Dongsheng

      Massive Selection for Double Flange Butterfly V...

      Product Video Product Description The butterfly valve is a valve that uses a disc-type opening and closing member to reciprocate about 90° to open, close or adjust the flow of the medium. The butterfly valve is not only simple in structure, small in size, light in weight, low in material consumption, small in installation size, small in driving torque, simple and fast in operation, but also has good flow regulation and closing and sealing characteristics at the same time. It has been develope...

    • Competitive Price for Foot Valve For Water Pump - DIN3352-F4 New Style Resilient Gate Valve – Dongsheng

      Competitive Price for Foot Valve For Water Pump...

      Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...