Featured
-
Cheap PriceList for Dual Plate Check Valves - Threaded Ball Check Valve – Dongsheng
Product Video Product Description The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0～80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve. Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated alum... -
professional factory for Water Butterfly Valve - Flanged Butterfly Valve – Dongsheng
Product Video Product Description The butterfly valve is a valve that uses a disc-type opening and closing member to reciprocate about 90° to open, close or adjust the flow of the medium. The butterfly valve is not only simple in structure, small in size, light in weight, low in material consumption, small in installation size, small in driving torque, simple and fast in operation, but also has good flow regulation and closing and sealing characteristics at the same time. It has been develope... -
Best quality China Valve Manufacturer - DIN3352-F4 New Style Resilient Gate Valve – Dongsheng
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the... -
Well-designed Swing Check Valve Wafer - Flanged Ball Check Valve – Dongsheng
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ... -
Newly Arrival Suction Foot Valve - DIN3352-F4 New Style Resilient Gate Valve – Dongsheng
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the... -
Factory Free sample Silent Check Valve - Threaded Ball Check Valve – Dongsheng
Product Video Product Description The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0～80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve. Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated alum... -
Factory Supply Double Flanged Dual Plate Check Valve - Stainless Steel Single Disc Swing Check Valve – Dongsheng
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic... -
Discountable price Lever Operated Butterfly Valve - Flanged Butterfly Valve – Dongsheng
Product Video Product Description The butterfly valve is a valve that uses a disc-type opening and closing member to reciprocate about 90° to open, close or adjust the flow of the medium. The butterfly valve is not only simple in structure, small in size, light in weight, low in material consumption, small in installation size, small in driving torque, simple and fast in operation, but also has good flow regulation and closing and sealing characteristics at the same time. It has been develope... -
Wholesale Discount Lug Style Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the... -
Quality Inspection for Flange Type Butterfly Valve - Wafer Type Butterfly Valve – Dongsheng
Product Video Product Description Dimensions: Size : DN 50 to DN 600 Ends : ANSI150/PN10/PN16/JIS10K Specifications: Type of valve: Butterfly valve wafer type Working temperature: EPDM -10℃-+120℃ Face to Face: ISO5752 sequence Upper flange standard: ISO5211 Pressure test conform: API598 Medium: Fresh Water, Sea Water, Food Stuff, all kinds of oil etc. Materials : Body: GGG-50 ductile iron body allows installation in ANSI 150 and DIN PN 10/16 pipe flanges. Disc: Stainless steel 304 (CF8).... -
High Performance 100mm Butterfly Valve - Lug Type Butterfly Valve – Dongsheng
Product Video Product Description Dimensions: Size : DN 32 to DN 600; Ends : Mounting between ANSI 150 and DIN PN 10/16 pipe flanges; Specifications: Type of valve: Butterfly valve wafer type; Ductile iron butterfly valve min Temperature : -5°C; Ductile iron butterfly valve max Temperature :+ 180°C; Max Pressure : 16 bars up to DN300, 10 bars over ; Removable seat; Actuator mounting plate according to ISO 5211; Full crossing stem; Lockable Handle 9 positions up to DN200. Non-lockable handl... -
Hot sale Double Disc Swing Check Valve - DIN3202-F6 Swing Check Valve – Dongsheng
Product Video Product Description Our Ductile Iron Swing Check Valve Flanged PN16 provides great sealing capacities for low pressure; uses of this check valve include water, heating, air conditioning and compressed air devices. Ductile Iron body and metal cover, both covered with epoxy, having a brass seat. Either vertically (only upwards) or horizontally installed Key features: Available sizes: 2″ up to 12″. Temperature range: -10°C to 120°C. Pressure rating: PN16 rated Low crac...
