Good Quality 2 Inch Silent Check Valve - Flanged Ball Check Valve – Dongsheng
Short Description:
Good Quality 2 Inch Silent Check Valve - Flanged Ball Check Valve – Dongsheng Detail:
Product Video
Product Description
Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc.
The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is closed and there is no water hammer.
Our Flanged Ball Check Valve body adopts a full water flow channel, with large flow and low resistance, provides outstanding sealing capacities for low pressure. It can be used in cold water, industrial and domestic sewage pipe networks, and is more suitable for submersible sewage pumps. It can be installed at the outlet of the water pump to prevent back flow and water hammer from damaging the pump.
Cast/Ductile iron body and cap, epoxy-coated body, NBR/EPDM seat and NBR/EPDM-coated aluminum ball ( 8″ to 16″ NBR/EPDM covered cast iron ball).
Either vertically (only upwards) or horizontally installed.
Key features:
- Available in sizes: 1 1/2″ up to 16″.
- Temperature range: 0°C to 80°C or -10°C to 120°C.
- Pressure rating: PN16/10 rated (1 1/2″ to 8″) and PN10 (10″ to 16″).
- Easily maintainable.
- Low cracking pressure.
For full details please download the accompanying datasheet.
- Ball Check Valve
- Cast/Ductile Iron body
- NBR/EPDM seat
- Flanged PN16, PN10
- Sizes 1 1/2″ to 16″
Product parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40 |
| 2 | Ball | Metal+ NBR/EPDM |
| 3 | Cap | GG25/GGG40 |
| 4 | Bolt | Stainless Steel |
| 5 | Gasket | NBR/EPDM |
| DN(mm) | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 180 | 200 | 240 | 260 | 300 | 350 | 400 | 500 | 600 | 700 | 800 | 900 | |
| H(mm) | 98 | 106 | 129 | 146 | 194 | 207 | 240 | 322 | 388 | 458 | 610 | 705 | |
| ΦD(mm) | PN10 | Φ110 | Φ125 | Φ145 | Φ160 | Φ180 | Φ210 | Φ240 | Φ295 | Φ350 | Φ400 | Φ460 | Φ515 |
| PN16 | Φ110 | Φ125 | Φ145 | Φ160 | Φ180 | Φ210 | Φ240 | Φ295 | Φ355 | Φ410 | Φ470 | Φ525 | |
Product show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
Our commission should be to provide our customers and consumers with ideal top quality and aggressive portable digital products for Good Quality 2 Inch Silent Check Valve - Flanged Ball Check Valve – Dongsheng , The product will supply to all over the world, such as: UK, Myanmar, Bolivia, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Muriel from Zambia - 2018.06.12 16:22
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Hulda from Malawi - 2017.08.18 11:04
Related products
-
OEM Customized Ball Type Check Valves - Stainl...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
8 Year Exporter Single Disc Check Valve - Stai...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
Good Quality 2 Inch Silent Check Valve - Thin ...
Product Video Product Description Carbon Steel Thin Type Check Valve with economical, space-saving spring, it comes with Carbon Steel body and NBR O-ring seal, general used for water, heating, air conditioning and compressed air devices. Key features: Available in sizes: 1 1/2″ to 24“. Temperature range: 0°C to 135°C. Pressure rating: 16 Bar. Low head loss. Space saving design. For full details please download the technical datasheet. Swing Check Valve Carbon Steel body Wafer P...
-
Manufacturing Companies for Single Disc Wafer C...
Product Video Product Description The function of the dual plates check valve is to only allow the medium to flow in one direction and prevent the flow in one direction. Usually this kind of valve works automatically. Under the action of the fluid pressure flowing in one direction, the valve flap opens; when the fluid flows in the opposite direction, the fluid pressure and the self-coincidence of the valve flap act on the valve seat, thereby cutting off the flow. Structural Features of Wafer ...
-
Chinese wholesale Stainless Steel Thread Ball V...
Product Video Product Description Application: As their simple design and reliable function, the ball valves can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. Medium can flow in both directions through the ball valves. Technical description: T max = 200 C PN: 63 made of stainless steel 3-pc design investment castings full bore – to minimize pressure losses soft-sealing seats floating ball Our primary objective is always t...
-
High Quality for Dual Plate Check Valve Manufac...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...
