Banner-1

High definition Double Door Wafer Check Valve - Thin Single Disc Swing Check Valve With Spring – Dongsheng

Short Description:

  • sns02
  • sns03
  • whatsapp

dsv product2 egr

Product Detail

Product Tags

Related Video

Feedback (2)

With this motto in mind, we've got become among essentially the most technologically innovative, cost-efficient, and price-competitive manufacturers for Dual Disk Check Valve, Stainless Steel Dual Plate Check Valve, Butterfly Type Check Valve, We warmly welcome clients, enterprise associations and mates from all over the globe to speak to us and find cooperation for mutual rewards.
High definition Double Door Wafer Check Valve - Thin Single Disc Swing Check Valve With Spring – Dongsheng Detail:

Product Video

Product Description

Compact, stainless steel wafer swing check valve provides outstanding sealing capacities for elevated and low pressure. Suitable for mounting between PN10/16 and ANSI 150 flanges in dimensions 2″ to 12″

Used for particular, industrial and HVAC purposes. Water, heating, air conditioning and compressed air devices are applications.

An economical test valve that saves room.

Either vertically (only upwards) or horizontally installed.

Key features:

  • CF8M stainless steel body and disc
  • VITON seat and body seal
  • Working Temperature: -20°C to +180°C
  • Maximum Working Pressure: 16 bar
  • Sizes: 2″ to 12″
  • Suitable for mounting between PN10/16 and ANSI150 flanges
  • Can be installed horizontal or in a vertical line with the flowing media going upwards
  • Economy Wafer Pattern Swing Check Valve

Product parameter

Product parameter2Product parameter1

NO. PART MATERIAL
1 Body SS304/SS316/WCB
2 Disc SS304/SS316/WCB
3 Ring Steel
4 Baffle SS304/SS316/WCB
5 O-Ring NBR/EPDM/VITON
6 O-Ring NBR/EPDM/VITON
7 Bolt SS304/SS316/WCB
8 Backing Plate SS316/SS304
9 Spring SS316/SS304
10 Shaft SS304/SS316
DN(mm) 50 65 80 100 125 150 200 250 300 350 400
ΦD(mm) PN10 107 127 142 162 192 218 273 328 378 438 489
PN16 107 127 142 162 192 218 273 329 384 444 491
ΦE(mm) 32 40 54 70 92 114 154 200 235 280 316
L(mm) 14 14 14 18 18 20 22 26 28 38 44

Product Show

THIN SINGLE DISC CHECK VALVE (2)
Contact: Judy  Email: info@lzds.cn  Whatsapp/phone: 0086-13864273734


Product detail pictures:

High definition Double Door Wafer Check Valve - Thin Single Disc Swing Check Valve With Spring – Dongsheng detail pictures

High definition Double Door Wafer Check Valve - Thin Single Disc Swing Check Valve With Spring – Dongsheng detail pictures

High definition Double Door Wafer Check Valve - Thin Single Disc Swing Check Valve With Spring – Dongsheng detail pictures


Related Product Guide:

We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for High definition Double Door Wafer Check Valve - Thin Single Disc Swing Check Valve With Spring – Dongsheng , The product will supply to all over the world, such as: French, Stuttgart, Egypt, Our products are very popular in the word, like South American, Africa, Asia and so on. Companies to "create first-class products" as the goal, and strive to provide customers with high quality products, provide high-quality after-sales service and technical support, and customer mutual benefit, create a better career and future!
  • A good manufacturers, we have cooperated twice, good quality and good service attitude.
    5 Stars By Pamela from Canada - 2017.10.23 10:29
    This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
    5 Stars By Esther from Dubai - 2018.11.22 12:28
    Write your message here and send it to us

    Related products

    • Wholesale Price Check Valve Wafer Type - Stainless Steel Single Disc Swing Check Valve – Dongsheng

      Wholesale Price Check Valve Wafer Type - Stain...

      Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...

    • Cheapest Factory Cast Iron Ball Valve - 1pc Threaded Ball Valve – Dongsheng

      Cheapest Factory Cast Iron Ball Valve - 1pc Th...

      Product Video Product Description Stainless Steel Ball Valve is a non-maintainable one piece, reduced bore ball valve; providing reliable functioning for both general and industrial chemical applications. An economical, compact and reliable, female/female ball valve with CF8/CF8M Stainless Steel valve body and PTFE seat. Used to ‘shut-off’ medium flows on a wide range of liquid and gaseous duties including drain and blow down, gauge isolation and test points. Features a blow-out p...

    • Chinese wholesale Stainless Steel Thread Ball Valve - 1pc Flanged Ball Valve – Dongsheng

      Chinese wholesale Stainless Steel Thread Ball V...

      Product Description Application: The stainless ball valves from 1 piece is designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases and loose materials. Medium may flow in both directions through the ball valves. Thanks to their simple design and reliable function, the ball valves made of one piece can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. Technical description: T max = 200 C PN:  10, 16...

    • Manufacturing Companies for Dual Plate Wafer Check Valves - Stainless Steel Single Disc Swing Check Valve – Dongsheng

      Manufacturing Companies for Dual Plate Wafer Ch...

      Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...

    • OEM manufacturer Ball Lift Check Valve - Threaded Ball Check Valve – Dongsheng

      OEM manufacturer Ball Lift Check Valve - Threa...

      Product Video Product Description The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0~80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve. Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated alum...

    • 2021 China New Design Check Valve Double Door - Flanged Ball Check Valve – Dongsheng

      2021 China New Design Check Valve Double Door -...

      Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...