High definition Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng
Short Description:
High definition Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng Detail:
Product Video
Product Description
The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the valve diameter, the fluid passage is completely unblocked, but this position cannot be monitored during operation.
In actual use, the apex of the valve stem is used as the mark, that is, the unmovable position, as its fully open position. In order to take into account the lock-up phenomenon caused by temperature changes, it is usually opened to the top position, and then rewind 1/2-1 turn, as the position of the fully open valve. Therefore, the fully open position of the valve is determined by the position of the gate (i.e. stroke). This type of valve should generally be installed horizontally in the pipeline.
Product parameter
| NO. | Part | Material |
| 1 | Body | GGG40/GGG50 |
| 2 | Bonnet | GGG40/GGG50 |
| 3 | Stem | 2Cr13/SS304/SS316/Brass |
| 4 | Disc | GGG40/GGG50 with NBR/EPDM |
| 5 | Stem Nut | Brass |
| DN | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | |
| L | 140 | 150 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 270 | 290 | 310 | 330 | 350 | |
| D | PN10 | 150 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 395 | 445 | 505 | 565 | 615 | 670 |
| PN16 | 405 | 460 | 520 | 580 | 640 | 715 | |||||||||
| D1 | PN10 | 110 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 350 | 400 | 460 | 515 | 565 | 620 |
| PN16 | 355 | 410 | 470 | 525 | 585 | 650 | |||||||||
| D2 | PN10 | 88 | 102 | 122 | 138 | 158 | 188 | 212 | 268 | 320 | 370 | 430 | 482 | 530 | 586 |
| PN16 | 378 | 438 | 490 | 548 | 610 | ||||||||||
| b | 17 | 17 | 17 | 17 | 19 | 19 | 19 | 22 | 23 | 26 | 28 | 30 | 30 | 32 | |
| n-d | PN10 | 4-18 | 4-18 | 4-18 | 8-18 | 8-18 | 8-18 | 8-22 | 8-22 | 12-22 | 12-22 | 16-22 | 16-26 | 20-26 | 20-26 |
| PN16 | 12-22 | 12-28 | 12-28 | 16-26 | 16-30 | 20-30 | 20-34 | ||||||||
| H | PN10 | 200 | 215 | 245 | 285 | 320 | 360 | 415 | 445 | 585 | 670 | 980 | 1144 | 1250 | 1366 |
| PN16 | 480 | ||||||||||||||
| C | 160 | 160 | 180 | 200 | 200 | 250 | 250 | 280 | 320 | 350 | 350 | 500 | 500 | 500 | |
Product Show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
To become the stage of realizing dreams of our employees! To build a happier, more united and extra professional workforce! To reach a mutual advantage of our prospects, suppliers, the society and ourselves for High definition Gate Valve - DIN3352-F4 Resilient Gate Valve – Dongsheng , The product will supply to all over the world, such as: Honduras, San Francisco, moldova, We aim to become the modern enterprise with the commercial ideal of "Sincerity and confidence" and with the aim of "Offering customers the most sincere services and best quality products". We sincerely ask for your unchanged support and appreciate your kind advice and guidance.
By Ray from Danish - 2018.09.21 11:01
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Elma from Thailand - 2017.09.16 13:44
Related products
-
Cheap PriceList for Dual Plate Check Valves - ...
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...
-
High reputation Diaphragm Type Valve - Non-Ris...
Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of ...
-
Ordinary Discount Gear Operated Butterfly Valve...
Product Video Product Description Dimensions: Size : DN 32 to DN 600; Ends : Mounting between ANSI 150 and DIN PN 10/16 pipe flanges; Specifications: Type of valve: Butterfly valve wafer type; Ductile iron butterfly valve min Temperature : -5°C; Ductile iron butterfly valve max Temperature :+ 180°C; Max Pressure : 16 bars up to DN300, 10 bars over ; Removable seat; Actuator mounting plate according to ISO 5211; Full crossing stem; Lockable Handle 9 positions up to DN200. Non-lockable handl...
-
PriceList for Rubber Diaphragm Valve - Rising ...
Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. Our company sticks to the principle of “Quality is the life of the company, and reputation is the soul of it” for China DIN Flange Cast Iron Diaphragm Valve Rising Stem GG25 Body, All produc...
-
100% Original Factory 2 Way Ball Valve - 1pc F...
Product Description Application: The stainless ball valves from 1 piece is designed to be used as shut-off valves for corrosive and non-corrosive liquids, gases and loose materials. Medium may flow in both directions through the ball valves. Thanks to their simple design and reliable function, the ball valves made of one piece can be used in food, chemical, petrochemical and pharmaceutical industries, in sewage and water treatment plants, etc. Technical description: T max = 200 C PN: 10, 16...
-
OEM Factory for Saunders Weir Type Diaphragm Va...
Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of ...
