OEM manufacturer Ball Lift Check Valve - Threaded Ball Check Valve – Dongsheng
Short Description:
OEM manufacturer Ball Lift Check Valve - Threaded Ball Check Valve – Dongsheng Detail:
Product Video
Product Description
The threaded ball check valve is widely used in wastewater, dirty water or high-concentration suspended solid water pipelines. Obviously, it can also be applied to drinking water pressurized pipelines. The temperature of the medium is 0～80℃. It is designed with very low load loss due to total passage and impossible obstacles. It is also a waterproof and maintenance-free valve.
Ductile Iron, epoxy-coated body and bonnet, NBR/EPDM seat and NBR/EPDM-coated aluminum ball.
Either vertically (only upwards) or horizontally installed.
Key features:
- Available in sizes: 1″ up to 3″.
- Temperature range: 0°C to 80°C or -10°C to 120°C.
- Pressure rating: PN10 rated
- Easy to maintain and install.
- Low cracking pressure.
For full details please download the accompanying datasheet.
- Ball Check Valve with Ductile Iron body
- NBR/EPDM seat
- Threaded BSP
Product parameter
| NO. | Part | Material |
| 1 | Body | GG25/GGG40 |
| 2 | Gasket | NBR/EPDM |
| 3 | Cap | GG25/GGG40 |
| 4 | Ball | NBR/EPDM |
| 5 | Bolt | Stainless steel |
| 6 | Nut | Stainless steel |
| DN(mm) | 25 | 32 | 40 | 50 | 65 | 80 |
| L(mm) | 125 | 132 | 145 | 174 | 200 | 243 |
| H(mm) | 75 | 75 | 85 | 126 | 113 | 165 |
Product Show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
We believe in: Innovation is our soul and spirit. Quality is our life. Customer need is our God for OEM manufacturer Ball Lift Check Valve - Threaded Ball Check Valve – Dongsheng , The product will supply to all over the world, such as: Panama, Iraq, Guinea, Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.
By Joanna from Vancouver - 2018.09.19 18:37
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Queena from Puerto Rico - 2018.06.19 10:42
Related products
-
Manufacturer of Lug Check Valve - Wafer Silent...
Product Video Product Description The silent check valves with a cast iron body, use a fully automatic spring assisted discs to eliminate water hammer while preventing flow reversal in the piping. The spring closure acts faster than that swing check valves, which can slam shut with the flow reversal. The wafer type body design is compact, versatile, and fits inside of the bolting in a flanged connection. For 2″ to 10″ diameters, the 125# wafer design allows for mating to either 12...
-
Reasonable price Double Disc Wafer Check Valve ...
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...
-
Newly Arrival Suction Foot Valve - DIN3352-F4 ...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
Best-Selling Butterfly Valve - Wafer Type Butt...
Product Video Product Description Dimensions: Size : DN 50 to DN 600 Ends : ANSI150/PN10/PN16/JIS10K Specifications: Type of valve: Butterfly valve wafer type Working temperature: EPDM -10℃-+120℃ Face to Face: ISO5752 sequence Upper flange standard: ISO5211 Pressure test conform: API598 Medium: Fresh Water, Sea Water, Food Stuff, all kinds of oil etc. Materials : Body: GGG-50 ductile iron body allows installation in ANSI 150 and DIN PN 10/16 pipe flanges. Disc: Stainless steel 304 (CF8)....
-
Cheap PriceList for Dual Plate Check Valves - ...
Product Video Product parameter NO. Part Material 1 Body GG20/GG25/GGG40/GGG50 2 Bonnet GG20/GG25/GGG40/GGG50 3 Disc GG20/GG25/GGG40/GGG50 with Brass/Bronze/Stainless steel 4 Seat Brass/Bronze/Stainless steel 5 Pin 2CR13 SS304 DN 50 65 80 100 125 150 200 250 300 L 203 216 241 292 330 356 495 622 698 D PN10 165 185 200 220 250 285 340 395 445 PN16 405 460 D1 PN10 125 145 160 180 210 240 295 350 400 PN16 355 410 D2 PN10 102 122 138 158 188 212 268 320 370 PN1...
-
Reasonable price Double Disc Wafer Check Valve ...
Product Video Product Description Our Ductile Iron Swing Check Valve Flanged PN16 provides great sealing capacities for low pressure; uses of this check valve include water, heating, air conditioning and compressed air devices. Ductile Iron body and metal cover, both covered with epoxy, having a brass seat. Either vertically (only upwards) or horizontally installed Key features: Available sizes: 2″ up to 12″. Temperature range: -10°C to 120°C. Pressure rating: PN16 rated Low crac...
