Reasonable price Double Disc Wafer Check Valve - Flanged Ball Check Valve – Dongsheng
Short Description:
Reasonable price Double Disc Wafer Check Valve - Flanged Ball Check Valve – Dongsheng Detail:
Product Video
Product Description
Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc.
The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is closed and there is no water hammer.
Our Flanged Ball Check Valve body adopts a full water flow channel, with large flow and low resistance, provides outstanding sealing capacities for low pressure. It can be used in cold water, industrial and domestic sewage pipe networks, and is more suitable for submersible sewage pumps. It can be installed at the outlet of the water pump to prevent back flow and water hammer from damaging the pump.
Cast/Ductile iron body and cap, epoxy-coated body, NBR/EPDM seat and NBR/EPDM-coated aluminum ball ( 8″ to 16″ NBR/EPDM covered cast iron ball).
Either vertically (only upwards) or horizontally installed.
Key features:
- Available in sizes: 1 1/2″ up to 16″.
- Temperature range: 0°C to 80°C or -10°C to 120°C.
- Pressure rating: PN16/10 rated (1 1/2″ to 8″) and PN10 (10″ to 16″).
- Easily maintainable.
- Low cracking pressure.
For full details please download the accompanying datasheet.
- Ball Check Valve
- Cast/Ductile Iron body
- NBR/EPDM seat
- Flanged PN16, PN10
- Sizes 1 1/2″ to 16″
Product parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40 |
| 2 | Ball | Metal+ NBR/EPDM |
| 3 | Cap | GG25/GGG40 |
| 4 | Bolt | Stainless Steel |
| 5 | Gasket | NBR/EPDM |
| DN(mm) | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 180 | 200 | 240 | 260 | 300 | 350 | 400 | 500 | 600 | 700 | 800 | 900 | |
| H(mm) | 98 | 106 | 129 | 146 | 194 | 207 | 240 | 322 | 388 | 458 | 610 | 705 | |
| ΦD(mm) | PN10 | Φ110 | Φ125 | Φ145 | Φ160 | Φ180 | Φ210 | Φ240 | Φ295 | Φ350 | Φ400 | Φ460 | Φ515 |
| PN16 | Φ110 | Φ125 | Φ145 | Φ160 | Φ180 | Φ210 | Φ240 | Φ295 | Φ355 | Φ410 | Φ470 | Φ525 | |
Product show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
Sticking for the belief of "Creating items of top of the range and creating buddies with people today from all over the world", we normally put the interest of shoppers in the first place for Reasonable price Double Disc Wafer Check Valve - Flanged Ball Check Valve – Dongsheng , The product will supply to all over the world, such as: Provence, Sudan, Seattle, We can meet the various needs of customers at home and abroad. We welcome new and old customers to come to consult & negotiate with us. Your satisfaction is our motivation! Allow us to work together to write a brilliant new chapter!
By Adam from Argentina - 2017.09.16 13:44
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Erin from Denver - 2017.08.28 16:02
Related products
-
Lowest Price for Spring Loaded Check Valve - C...
Product Video Product Description Single disc check valve is also called single plate check valve, it is a valve that can automatically prevent fluid back flow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to ...
-
Factory Cheap Hot Check Valve - Stainless Stee...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
Super Lowest Price Dual Plate Check Valve - St...
Product Video Product Description Our Wafer stainless steel dual plate check valve is disc-shaped and rotates around the shaft of the valve seat passage. Because the inner passage of the valve is streamlined, the flow resistance is small, and it is suitable for large-diameter occasions with low flow velocity and infrequent flow changes. An economical, space-saving dual plate check valve with a spring and with Stainless Steel body, and Viton seal. Either vertically (only upwards) or horizontal...
-
Cheap PriceList for Dual Plate Check Valves - ...
Product Video Product Description Compact, stainless steel wafer swing check valve provides outstanding sealing capacities for elevated and low pressure. Suitable for mounting between PN10/16 and ANSI 150 flanges in dimensions 2″ to 12″ Used for particular, industrial and HVAC purposes. Water, heating, air conditioning and compressed air devices are applications. An economical test valve that saves room. Either vertically (only upwards) or horizontally installed. Key features: CF...
-
PriceList for Rubber Diaphragm Valve - Rising ...
Product Video Product Description Diaphragm Valves have two kinds of types, wire and full flow, which use a ‘pinching’ method to stop the valve flow using a flexible diaphragm.These types of valves are generally not suited for very high-temperature fluids and are mainly used on liquid systems. We’ll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of international top-grade and high-tech enterprises for New Style China DN300...
-
Competitive Price for Foot Valve For Water Pump...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
