Stainless Steel Single Disc Swing Check Valve
Short Description:
1. Working pressure: 1.0Mpa/1.6Mpa/2.5Mpa
2. Working temperature:
NBR: 0℃～+80℃
EPDM: -10℃～+120℃
VITON: -20℃～+180℃
3. Face to face according to ANSI 125/150
4. Flange according to EN1092-2, ANSI 125/150 etc.
5. Testing: DIN3230, API598
6. Medium: Fresh Water, Sea water, food stuff, all kinds of oil, acid, alkaline liquid etc.
Product Video
Product Description
Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment.
Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertical or horizontal piping.
Key features:
- Available in sizes: 2″ to 12“.
- Temperature range: -20°C to 200°C.
- Pressure rating: 10 Bar/16 Bar/25 Bar.
- Low cracking pressure.
- Space saving design.
Product parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40/SS304/SS316 |
| 2 | Ring | Steel |
| 3 | Axle | SS304/SS316 |
| 4 | Spring | Stainless steel |
| 5 | Gasket | PTFE |
| 6 | Disc | WCB/SS304/SS316 |
| 7 | Seat ring | NBR/EPDM/VITON |
| 8 | Gasket | NBR |
| 9 | Screw | Steel |
| NO. | Part | Material |
| DN(mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 44.5 | 47.6 | 50.8 | 57.2 | 63.5 | 69.9 | 73 | 79.4 | 85.7 | 108 | 108 | |
| ΦE(mm) | 33 | 43 | 52 | 76 | 95 | 118 | 163 | 194 | 241 | 266 | 318 | |
| Φ(mm) | PN10 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 328 | 378 | 438 | 489 |
| PN16 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 329 | 384 | 446 | 498 | |
Product show
Contact: Judy Email: info@lzds.cn phone/WhatsApp +86 18561878609
Related products
-
Foot Valve
Product Video Product Description Cast Iron Flanged Silent Check Valve provides great sealing capacities for high and low pressure. In particular, industrial and HVAC applications, water, heating, air conditioning and compressed air devices are included. Please feel free to contact us by email info@lzds.cn or phone/WhatsApp +86 18561878609. This cast iron flanged silent check valve comes in a body of Cast Iron, epoxy-coated, EPDM seat and Stainless Steel spring. These components make it an ec...
-
Stainless Steel Double Disc Swing Check Valve
Product Video Product Description Our Wafer stainless steel dual plate check valve is disc-shaped and rotates around the shaft of the valve seat passage. Because the inner passage of the valve is streamlined, the flow resistance is small, and it is suitable for large-diameter occasions with low flow velocity and infrequent flow changes. An economical, space-saving dual plate check valve with a spring and with Stainless Steel body, and V...
-
Big Size Wafer Type Lift Check Valve
Product Video Product Description Check valves allow flow in one direction and automatically prevent flow in the opposite direction. This valve is mainly used in the fluid system containing strong oxidative mediums, like water supply system, heat supply system and acid system etc. It is always used as accessory of boilers. It has exquisite profile and simple structure. Its spring device functions to speed up the closing movement of the disc so as to eliminate water h...
-
Flanged Ball Check Valve
Product Video Product Description Ball Check Valve –Ball check valve is a kind of check valve with multi-ball, multi-channel, multi-cone inverted flow structure, mainly composed of front and rear valve bodies, rubber balls, cones, etc. The ball check valve uses a rubber-covered rolling ball as the valve disc. Under the action of the medium, it can roll up and down on the integral slide of the valve body to open or close the valve, with good sealing performance and noise reduction The city is ...
-
Thin Single Disc Swing Check Valve
Product Video Product Description Carbon Steel Thin Type Check Valve with economical, space-saving spring, it comes with Carbon Steel body and NBR O-ring seal, general used for water, heating, air conditioning and compressed air devices. Key features: Available in sizes: 1 1/2" to 24". Temperature range: 0°C to 135°C. Pressure rating: 16 Bar. Low head loss. Space saving design. For full details please download the technical datasheet. Swing Check Valve Carbon Stee...
-
Flanged Silent Check Valve
Product Video Product Description Cast Iron Flanged Silent Check Valve provides great sealing capacities for high and low pressure. In particular, industrial and HVAC applications, water, heating, air conditioning and compressed air devices are included. This cast iron flanged silent check valve comes in a body of Cast Iron, epoxy-coated, EPDM seat and Stainless Steel spring. These components make it an economical, secure Standard or Foot Check valve. The valve becomes a fully operational Foo...
