Wholesale Double Disc Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng
Short Description:
Wholesale Double Disc Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng Detail:
Product Video
Product Description
Single disc check valve is also called single plate check valve, it is a valve that can automatically prevent fluid back flow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to prevent the fluid from flowing back. It can be installed horizontally or vertically. For vertical installation, pay attention to the flow of water from bottom to top, and pay attention to whether the installation direction is correct during installation.
The wafer swing check valve is an economical alternative to the traditional flanged swing check valve. The lightweight wafer type valve consists of a 304 stainless steel disc, and on reverse flow will have a positive shutoff owing to the resilient seat.
- Low Head Loss
- Pressure rating – 16 Bar
- Available in sizes 50mm – 400mm
We will uphold the “excellent quality, satisfactory service” purpose, and strive to become your ideal business partner.
For Factory directly DUCTILE IRON/CAST IRON WAFER SINGLE DISC CHECK VALVE PN16, we sincerely hope to establish some satisfactory associations along with you. We will keep you informed of our progress and establish a stable cooperative relationship with you.
Factory directly DIN or ANSI Single Plate Check Valve, Single Disc Check Valve, high output, good quality, timely delivery, to ensure your satisfaction.
We welcome all inquiries and comments. If you are interested in any of our products or have an OEM order, please feel free to contact us, working with us will save you money and time.
Product Parameter
| NO. | PART | MATERIAL |
| 1 | Body | GG25/GGG40/SS304/SS316 |
| 2 | Ring | Steel |
| 3 | Axle | SS304/SS316 |
| 4 | Spring | Stainless steel |
| 5 | Gasket | PTFE |
| 6 | Disc | WCB/SS304/SS316 |
| 7 | Seat ring | NBR/EPDM/VITON |
| 8 | Gasket | NBR |
| 9 | Screw | Steel |
| NO. | Part | Material |
| DN(mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | |
| L(mm) | 44.5 | 47.6 | 50.8 | 57.2 | 63.5 | 69.9 | 73 | 79.4 | 85.7 | 108 | 108 | |
| ΦE(mm) | 33 | 43 | 52 | 76 | 95 | 118 | 163 | 194 | 241 | 266 | 318 | |
| Φ(mm) | PN10 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 328 | 378 | 438 | 489 |
| PN16 | 107 | 127 | 142 | 162 | 192 | 218 | 273 | 329 | 384 | 446 | 498 | |
Product Show
Contact: Judy Email: info@lzds.cn Whatsapp/phone: 0086-13864273734
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand overseas business" is our development strategy for Wholesale Double Disc Check Valve - Cast Iron Single Disc Swing Check Valve – Dongsheng , The product will supply to all over the world, such as: Bolivia, Colombia, Lithuania, The working experience in the field has helped us forged a strong relations with customers and partners both in domestic and international market. For years, our products have been exported to more than 15 countries in the world and have been widely used by customers.
By Alex from Finland - 2018.11.28 16:25
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Frederica from Mombasa - 2018.10.31 10:02
Related products
-
New Delivery for Flange Butterfly Valve - Flan...
Product Video Product Description The butterfly valve is a valve that uses a disc-type opening and closing member to reciprocate about 90° to open, close or adjust the flow of the medium. The butterfly valve is not only simple in structure, small in size, light in weight, low in material consumption, small in installation size, small in driving torque, simple and fast in operation, but also has good flow regulation and closing and sealing characteristics at the same time. It has been develope...
-
OEM Manufacturer Saunders Valves - DIN3352-F4 ...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
High Quality Full Bore Ball Valve - Iron Flang...
Product Video Product Description Specifications: Cast iron ball valve : Min Temperature : -20°C Cast iron ball valve : Max Temperature :+ 120°C Max Pressure : 16 Bars Specifications : Full bore Hollow stainless ball from DN 50 to DN 200 Ends : EN 1092-2 Flanges Materials : Body: Cast iron body – Cast iron EN GJL-250 Sphere: Stainless Sphere – SS 304 Stem seal with PTFE ring and O-ring EPDM Axis blow-out proof full bore With spacing DIN 3202 Product Parameter NO. Part Material 1 Bo...
-
China OEM Flanged Check Valve - Stainless Stee...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
-
Wholesale Ci Gate Valve - DIN3352-F4 Resilient...
Product Video Product Description The soft-seal gate valve is divided into two types: rising stem soft-seal gate valve and non-rising stem soft seal gate valve. Usually there is a trapezoidal thread on the lifting rod, through the nut in the middle of the gate and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is turned into operating thrust. When the valve is opened, when the lift height of the gate is equal to 1:1 times the...
-
High reputation Dual Disc Check Valve - Stainl...
Product Video Product Description Check Valves are automatic shut-off valves that are commonly used for preventing back flow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against back flow, which could harm the pump or other equipment. Wafer Type Single Disc Swing Check Valves are designed for installation in flanged piping systems, between two flanges. Valves may be installed in vertic...
